振动监测 > X20(c)CM4810使用手册 > 寄存器说明 - Register description > 功能模型0 标准 Function model 0

This is the default function model for the module. The calculated module characteristic values are streamed from the module via Flatstream every 300 ms and prepared for the user by Automation Runtime. If the streamed data is not collected by the next transfer, the characteristic values of the next measurement are lost. For this reason, the maximum cycle time must be observed for an error-free evaluation.

Analog inputs are provided as cyclic data points.

To help the user, all of the module's characteristic values – such as Flatstream handling for characteristic values, unit scaling and so on – are prepared in this function model using Automation Runtime and then made available to the user. See Automation Runtime support.

With this function model, it is also possible to upload data from the module via another Flatstream data buffer. Library AsIOVib is available for uploading the buffers from the module. For a description of the library, see AsIOVib.

In this function model, the module can only be configured using the I/O configuration. No registers are permitted to be reconfigured acyclically.

这是模块的默认功能模型。模块计算出的特征值由 Automation Runtime 为用户准备，每 300 毫秒通过 Flatstream 从模块流式传输一次。如果下一次传输时未收集到流数据，则下一次测量的特征值将丢失。因此，必须遵守最长循环时间，以便进行无差错的计值。

模拟量输入信号作为周期性数据点提供。

为了帮助用户，模块的所有特征值（例如特征值的 Flatstream 处理、单位尺度..等）都是在该功能模型中由 Automation Runtime 准备好，然后提供给用户使用。请参阅Automation Runtime 支持.

有了这个功能模型，也可以通过另一个 Flatstream 数据缓冲器从模块上传数据。库 AsIOVib 可用于从模块上传缓冲区。有关库的说明，请参阅 AsIOVib.

在这个功能模型中，模块只能用 I/O configuration 来进行配置，不允许以非循环方式重新配置寄存器。

Register 寄存器	Name 名字	Data type 数据类型	Read 读		Write 写
Register 寄存器	Name 名字	Data type 数据类型	Cyclic 循环	Acyclic 非循环	Cyclic 循环	Acyclic 非循环
Module - Configuration 模块 - 配置
-	Cycle time 循环时间	-
General registers 通用寄存器
1310	AutogainDelay01 AutogainDelay01（自动增益延迟01）	UINT				●
526	AutogainDelay01Read AutogainDelay01Read（读自动增益延迟01）	UINT		●
0	Control01 Control01（控制01）	UINT			●
514	SensorConfig01 SensorConfig01（传感器配置01）	UINT				●
514	SensorConfig01Read SensorConfig01Read（读传感器配置01）	UINT		●
0	Status01 Status01（状态01）	UINT	●
Analog input functions 模拟量输入功能
2 * N	AnalogInput0N (index N = 1 to 4) AnalogInput0N (模拟量输入0N，N 为1~4)	INT	●
1330	AnalogInputConfig01 AnalogInputConfig01(模拟量输入配置01)	UINT				●
570	AnalogInputConfig01Read AnalogInputConfig01Read(读模拟量输入配置01)	UINT		●
2	AnalogInputControlByte01 AnalogInputControlByte01(模拟量输入控制字节01)	UINT			●
22 + N* 4	AnalogInputSamples0N (index N = 1 to 4) AnalogInputSamples0N (模拟量输入采样0N，N 为1~4)	UINT			●
1298	AnalogInputScale01 AnalogInputScale01（模拟量输入尺度01）	UINT				●
546	AnalogInputScale01Read AnalogInputScale01Read（读模拟量输入尺度01）	UINT		●
1310 + N*4	SamplesAnalogInput0N (index N = 1 to 4) SamplesAnalogInput0N (样本模拟量输入0N，N 为1~4)	UINT				●
526 + N* 4	SamplesAnalogInput0NRead (index N = 1 to 4) SamplesAnalogInput0NRead (读样本模拟量输入0N，N 为1~4)	UINT		●
Additional registers and characteristic values generated by Automation Runtime Automation Runtime 生成的其它寄存器和特征值
-	ActSpeed0N (index N = 1 to 4) ActSpeed0N (当前速度，N 为1~4)	REAL			●
-	CrestFactorHighFrequency0N (index N = 1 to 4) CrestFactorHighFrequency0N (高通后的波峰因数（裕度）N，N 为1~4)	REAL	●
-	DataConsistentWithLockedBuffers0N (index N = 1 to 4) DataConsistentWithLockedBuffers0N (Buffer数据一致性锁，N 为1~4)	BOOL	●
-	DataToggleBit01 DataToggleBit01（数据切换指示位）	BOOL	●
-	OverflowAnalogInput0N (index N = 1 to 4) OverflowAnalogInput0N (模拟量输入溢出标志位0N，N 为1~4）	BOOL	●
-	OverflowCharacteristicValues0N (index N = 1 to 4) OverflowCharacteristicValues0N (特征值溢出标志位0N，N 为1~4)	UINT	●
-	OverflowFrequencyBands01 OverflowFrequencyBands01（频带溢出标志位）	UDINT	●
-	PeakHighFrequencyRef0N (index N = 1 to 4) PeakHighFrequencyRef0N (高通后的峰值参考值0N，N 为1~4)	REAL			●
-	PeakHighFrequencyRefCalculated0N (index N = 1 to 4) PeakHighFrequencyRefCalculated0N (计算后的高通后峰值参考值0N，N 为1~4)	REAL	●
-	PeakRawRef0N (index N = 1 to 4) PeakRawRef0N (原始峰值参考值0N，N 为1~4)	REAL			●
-	PeakRawRefCalculated0N (index N = 1 to 4) PeakRawRefCalculated0N (计算后的原始峰值参考值0N，N 为1~4)	REAL	●
-	RmsHighFrequencyRef0N (index N = 1 to 4) RmsHighFrequencyRef0N (高通后的有效值参考值0N，N 为1~4)	REAL			●
-	RmsHighFrequencyRefCalculated0N (index N = 1 to 4) RmsHighFrequencyRefCalculated0N (计算后的高通后原始信号有效值参考值0N，N 为1~4)	REAL	●
-	RmsRawRef0N (index N = 1 to 4) RmsRawRef0N (原始信号有效值参考值-0N 为1~4)	REAL			●
-	RmsRawRefCalculated0N (index N = 1 to 4) RmsRawRefCalculated0N (计算后的原始信号有效值参考值N 为1~4)	REAL	●
-	SensitivitySensor0N (index N = 1 to 4) SensitivitySensor0N (传感器敏感度0N 为1~4)	REAL			●
-	Vdi3832KtHighFrequency0N (index N = 1 to 4) Vdi3832KtHighFrequency0N (高通后的Vdi3832K(t)值N 为1~4)	REAL	●
-	Vdi3832KtRaw0N (index N = 1 to 4) Vdi3832KtRaw0N (Vdi3832K(t)原始值N 为1~4)	REAL	●
Characteristic values (transferred in Flatstream) 特征值 (通过 Flatstream 传输)
-	CrestFactorRaw0N (index N = 1 to 4) 波峰因数（裕度）0N (0N，N 为1~4)	REAL	●
-	Iso10816_0N (index N = 1 to 4) Iso10816_0N (ISO10816标准N，N 为1~4)	REAL	●
-	KurtosisRaw0N (index N = 1 to 4) KurtosisRaw0N (峰态系数（峭度），N 为1~4)	REAL	●
-	PeakHighFrequency0N (index N = 1 to 4) PeakHighFrequency0N (高通后的峰值0N，N 为1~4)	REAL	●
-	PeakRaw0N (index N = 1 to 4) PeakRaw0N (峰值原始值0N 为1~4)	REAL	●
-	RmsAccEnvelope0N (index N = 1 to 4) RmsAccEnvelope0N (加速度包络有效值0N 为1~4)	REAL	●
-	RmsAccRaw0N (index N = 1 to 4) RmsAccRaw0N (加速度原始信号有效值0N，N 为1~4)	REAL	●
-	RmsHighFrequency0N (index N = 1 to 4) RmsHighFrequency0N (高通后的有效值0N 为1~4)	REAL	●
-	RmsRaw0N (index N = 1 to 4) RmsRaw0N (原始信号的有效值0N，N 为1~4)	REAL	●
-	RmsVelEnvelope0N (index N = 1 to 4) RmsVelEnvelope0N (速度包络的有效值0N，N 为1~4)	REAL	●
-	RmsVelRaw0N (index N = 1 to 4) RmsVelRaw0N (原始速度的有效值0N，N 为1~4)	REAL	●
-	SkewnessRaw0N (index N = 1 to 4) SkewnessRaw0N (偏态系数原始值（歪度）0N，N 为1~4)	REAL	●
-	FrequencyBandN (index N = 1 to 32) FrequencyBandN (频带值0N，N 为1~32)	REAL	●
Minimum and maximum characteristic values 特征值的最小值和最大值
2690	MinMaxCounter01 MinMaxCounter01（最小值最大值计数器）	UINT		●
3588 + N*8	CrestFactorRawMax0N (index N = 1 to 4) CrestFactorRawMax0N (波峰因数（裕度）最大值0N，N 为1~4)	UDINT		●
2948 + N*8	CrestFactorRawMin0N (index N = 1 to 4) CrestFactorRawMin0N ((波峰因数（裕度）最小值0N，N 为1~4)	UDINT		●
3332 + N*8	Iso10816Max0N (index N = 1 to 4) Iso10816Max0N (ISO10816最大值0N，N 为1~4)	UDINT		●
2692 + N*8	Iso10816Min0N (index N = 1 to 4) Iso10816Min0N (ISO10816最小值0N，N 为1~4)	UDINT		●
3556 + N*8	KurtosisRawMax0N (index N = 1 to 4) KurtosisRawMax0N ( 峰态系数（峭度）最大值0N，N 为1~4)	DINT		●
2916 + N*8	KurtosisRawMin0N (index N = 1 to 4) KurtosisRawMin0N (峰态系数（峭度）最小值0N，N 为1~4)	DINT		●
3492 + N*8	PeakHighFrequencyMax0N (index N = 1 to 4) PeakHighFrequencyMax0N (高通后的峰值最大值0N，N 为1~4)0N，N 为1~4)	UDINT		●
2852 + N*8	PeakHighFrequencyMin0N (index N = 1 to 4) PeakHighFrequencyMin0N (高通后的峰值最小值0N，N 为1~4)	UDINT		●
3684 + N*8	PeakRawMax0N (index N = 1 to 4) PeakRawMax0N (峰值原始值最大值0N，N 为1~4)	UDINT		●
3044 + N*8	PeakRawMin0N (index N = 1 to 4) PeakRawMin0N (峰值原始值最小值0N，N 为1~4)	UDINT		●
3428 + N*8	RmsAccEnvelopeMax0N (index N = 1 to 4) RmsAccEnvelopeMax0N (加速度包络有效值最大值0N，N 为1~4)	UDINT		●
2788 + N*8	RmsAccEnvelopeMin0N (index N = 1 to 4) RmsAccEnvelopeMin0N (加速度包络有效值最小值0N，N 为1~4)	UDINT		●
3364 + N*8	RmsAccRawMax0N (index N = 1 to 4) RmsAccRawMax0N (加速度原始信号有效值最大值0N，N 为1~4)	UDINT		●
2724 + N*8	RmsAccRawMin0N (index N = 1 to 4) RmsAccRawMin0N (加速度原始信号有效值最小值0N，N 为1~4)	UDINT		●
3524 + N*8	RmsHighFrequencyMax0N (index N = 1 to 4) RmsHighFrequencyMax0N (高通后的有效值最大值0N，N 为1~4)	UDINT		●
2884 + N*8	RmsHighFrequencyMin0N (index N = 1 to 4) RmsHighFrequencyMin0N (高通后的有效值最小值0N，N 为1~4)	UDINT		●
3652 + N*8	RmsRawMax0N (index N = 1 to 4) RmsRawMax0N (原始信号的有效值最大值0N，N 为1~4)	UDINT		●
3012 + N*8	RmsRawMin0N (index N = 1 to 4) RmsRawMin0N (原始信号的有效值最小值0N，N 为1~4)	UDINT		●
3460 + N*8	RmsVelEnvelopeMax0N (index N = 1 to 4) RmsVelEnvelopeMax0N (速度包络的有效值最大值0N，N 为1~4)	UDINT		●
2820 + N*8	RmsVelEnvelopeMin0N (index N = 1 to 4) RmsVelEnvelopeMin0N (速度包络的有效值最小值0N，N 为1~4)	UDINT		●
3396 + N*8	RmsVelRawMax0N (index N = 1 to 4) RmsVelRawMax0N (原始速度的有效值最大值0N，N 为1~4)	UDINT		●
2756 + N*8	RmsVelRawMin0N (index N = 1 to 4) RmsVelRawMin0N (原始速度的有效值最小值0N，N 为1~4)	UDINT		●
3620 + N*8	SkewnessRawMax0N (index N = 1 to 4) SkewnessRawMax0N (偏态系数原始值（歪度）最大值0N，N 为1~4)	DINT		●
2980 + N*8	SkewnessRawMin0N (index N = 1 to 4) SkewnessRawMin0N (偏态系数原始值（歪度）最小值0N，N 为1~4)	DINT		●
Frequency configuration 频率配置
1302	HighFrequencyConfig01 高频配置01	UINT				●
550	HighFrequencyConfig01Read 读高频配置01	UINT		●
1306	MaxFrequencyEnvelope01 包络频率最大值01	UINT				●
558	MaxFrequencyEnvelope01Read 读包络频率最大值01	UINT		●
526	MaxFrequencyRaw01 原始频率最大值01	UINT				●
554	MaxFrequencyRaw01Read 读原始频率最大值01	UINT		●
522	MinFrequencyEnvelope01 包络频率最小值01	UINT				●
566	MinFrequencyEnvelope01Read 读包络频率最小值01	UINT		●
518	MinFrequencyRaw01 原始频率最小值01	UINT				●
562	MinFrequencyRaw01Read 读原始频率最小值01	UINT		●
Frequency bands 频带
3716 + N*8	FrequencyBandMaxN (index N = 01 to 32) FrequencyBandMaxN (频带最大值，N 为1~32)	UDINT		●
3076 + N*8	FrequencyBandMinN (index N = 01 to 32) FrequencyBandMinN (频带最小值，N 为1~32)	UDINT		●
506 + N*24	FrequencyBandNConfig (index N = 01 to 32) FrequencyBandNConfig (频带N的配置，N 为1~32)	UINT				●
1194 + N*24	FrequencyBandNConfigRead (index N = 01 to 32) FrequencyBandNConfigRead (读频带N的配置，N 为1~32)	UINT		●
514 + N*24	FrequencyBandNDmgFreq60rpm (index N = 01 to 32) FrequencyBandNDmgFreq60rpm (频带N在60rpm时的损坏频率，N 为1~32)	UINT				●
1202 + N*24	FrequencyBandNDmgFreq60rpmRead (index N = 01 to 32) FrequencyBandNDmgFreq60rpmRead (读频带N在60rpm时的损坏频率，N 为1~32)	UINT		●
522 + N*24	FrequencyBandNLowerFrequency (index N = 01 to 32) FrequencyBandNLowerFrequency (频带N的计算的最小频率，N 为1~32)	UINT				●
1210 + N*24	FrequencyBandNLowerFrequencyRead (index N = 01 to 32) FrequencyBandNLowerFrequencyRead (读频带N的计算的最小频率，N 为1~32)	UINT		●
518 + N*24	FrequencyBandNTolerance (index N = 01 to 32) FrequencyBandNTolerance (频带N的公差频率，N 为1~32)	UINT				●
1206 + N*24	FrequencyBandNToleranceRead (index N= 01 to 32) FrequencyBandNToleranceRead (读频带N的公差频率，N 为1~32)	UINT		●
526 + N*24	FrequencyBandNUpperFrequency (index N = 01 to 32) FrequencyBandNUpperFrequency (频带N的计算的最大频率，N 为1~32)	UINT				●
1214 + N*24	FrequencyBandNUpperFrequencyRead (index N = 01 to 32) FrequencyBandNUpperFrequencyRead (读频带N的计算的最大频率，N 为1~32)	UINT		●
Flatstream Flat流
2311	BufferForward01 BufferForward01(Buffer转发)	USINT				●
2318	BufferForwardDelay01 BufferForwardDelay01(Buffer转发延迟01)	UINT				●
2368	BufferInputSequence01 BufferInputSequence01（Buffer输入序列01）	USINT	●
2400	BufferOutputSequence01 BufferOutputSequence01（Buffer输出序列01）	USINT			●
2368 + N	BufferRxByte0N (index N = 1 to 5) BufferRxByte0N (Buffer接收字节0N，N 为1~5)	USINT	●
2400 + N	BufferTxByte0N (index N = 1 to 4) BufferTxByte0N (Buffer发送字节0N，N 为1~4)	USINT			●
263	ParameterForward01 ParameterForward01（转发参数01）	USINT				●

功能0 标准 Function model 0 - Standard

功能0 标准 Function model 0 - Standard