|
<< 点击显示目录 >> 主页 振动监测 > X20(c)CM4810使用手册 > 寄存器说明 - Register description > 任务类的分配 - Assignment of the task class |
Name:
Cycle time
名称:
Cycle time
By assigning the cycle time to a task class, the data exchange between the CPU and module can be prioritized and adapted to the requirements of the application. Faster task classes result in increased data throughput, but this increases the system load.
通过将周期时间分配给任务类（Task），可以确定CPU和模块之间的数据交换的优先级，并根据应用程序的要求进行调整。更快的任务类会增加数据吞吐量，但这会增加系统负载。
Information: 注意:
Using a task class that is too slow can result in new data from the module not being available within a measurement cycle. The task class must be less than or equal to to the maximum cycle time. 使用太慢的任务类可能导致模块的新数据在测量周期内不可用。任务类必须小于或等于 maximum cycle time（最大循环时间）。 |
Information: 注意:
This configuration involves a driver setting that cannot be changed during runtime! 此配置涉及一个在运行时无法更改的驱动程序设置！ |
Data type 数据类型 |
Values 值 |
Information 说明 |
|---|---|---|
- |
1 to 8 |
Task class used 使用的 task |