|
<< 点击显示目录 >> 主页 振动监测 > X20(c)CM4810使用手册 > 寄存器说明 - Register description > 模拟量输入功能 - Analog input functions > 模拟量输入采样 - AnalogInputSamples |
Name:
AnalogInputSamples01 to AnalogInputSamples04
名称:
AnalogInputSamples01 to AnalogInputSamples04
If bit 15 of the respective SamplesAnalogInput register is 1, then this register cyclically defines the number of samples used to calculate characteristic values.
如果相应的 SamplesAnalogInput（样本模拟量输入） 寄存器的第15位为1，则该寄存器循环定义用于计算特征值的样本数。
Information: 说明: If the register is changed while a measurement is running, then the current measurement is discarded (AnalogInputToggleBit0X does not change). This is especially important to remember when using continuous mode with enable. 如果该寄存器在测量过程中被改变，那么当前的测量将被丢弃 (AnalogInputToggleBit0X 的值不会改变)。在使用 continuous mode with enable（连续测量）时这一点尤其要记住。 |
Data type 数据类型 |
Values 值 |
Information 说明 |
UINT |
0 |
Invalid 无效 |
1 to 8191 |
Characteristic value calculation active for the respective channel in the corresponding analog input 在相应的模拟量输入中对相应通道进行特征值的计算 |
|
>8191 |
Invalid 无效 |
The time between 2 samples depends on register MaxFrequencyRaw:
2个采样之间的间隔时间取决于 MaxFrequencyRaw寄存器: