<< 点击显示目录 >> 主页  振动监测 > X20(c)CM4810使用手册 > 寄存器说明 - Register description  > 模拟量输入功能 - Analog input functions  > 模拟量输入中的特征值计算 - Characteristic value calculation in AnalogInput > 带使能的连续模式（连续模式） - Continuous mode with enable (continuous mode)

 

This mode offers the following advantages:

•When the parameters are configured correctly, nothing can be overlooked.

•Using "enable", measurement in the module can be started after an event or events can be hidden.

•The toggle bit toggles with every new value.

The following must be taken into consideration for the configuration:

•In order to guarantee seamless measurement, the sample time (number of samples * sample rate) must be longer than the X2X Link cycle (see register SamplesAnalogInput).

•If a shorter sample time than the X2X Link cycle is configured, the last complete measurement is always transferred.

 

这种模式具有已下优点：

•当参数配置正确时，没有忽略项。

•使用 "enable"，可以在事件发生后启动模块中的测量，也可以将事件隐藏。

•切换位随每个新值进行切换。

配置时必须考虑以下因素：

•为了保证无缝测量，采样时间（采样数*采样率）必须长于X2X链路周期（请参阅SamplesAnalogInput)寄存器

•如果配置的采样时间比X2X链路周期短，则总是传输最后一次完整的测量。