|
<< 点击显示目录 >> 主页 振动监测 > X20(c)CM4810使用手册 > 寄存器说明 - Register description > 基本寄存器 - General registers > 传感器配置 - SensorConfig |
Name:
SensorConfig01
名称:
SensorConfig01
This register can be used to enable or disable the IEPE sensor supply for individual channels.
此寄存器可用于启用或禁用单个通道的 IEPE 传感器供电
Data type 数据类型 |
Values 值 |
Bus controller default setting 总线控制器默认设置 |
UINT |
See the bit structure. 请参阅位结构 |
0 |
Bit structure:
位结构:
Bit 位 |
Description 描述 |
Value 值 |
Information 说明 |
0 |
Channel 1: IEPE supply 通道 1: IEPE 供电 |
0 |
Off (bus controller default setting) Off (总线控制器默认设置) |
1 |
On On |
||
... |
|
... |
|
3 |
Channel 4: IEPE supply 通道 4: IEPE 供电 |
0 |
Off (bus controller default setting) Off (总线控制器默认设置) |
1 |
On |
||
4 - 7 |
Reserved 保留 |
0 |
|
8 |
Channel 1: EnableVelocityCalculation 通道 1: 启用速度计算 |
0 |
No calculation (bus controller default setting) 不计算 (总线控制器默认设置) |
1 |
Calculation enabled 启用计算 |
||
... |
|
... |
|
11 |
Channel 4: EnableVelocityCalculation 通道 4: 启用速度计算 |
0 |
No calculation (bus controller default setting) 不计算 (总线控制器默认设置) |
1 |
Calculation enabled 启用计算 |
||
12 - 13 |
Reserved 保留 |
0 |
|
14 |
Buffer length Buffer 长度 |
0 |
8192 measured values (bus controller default setting) 8192 个测量点 (总线控制器默认值) |
1 |
65535 measured values 65535 个测量点 |
||
15 |
Selects the function model 选择功能模型 |
0 |
Function model 2 - Slow master and Function model 254 - Bus controller (bus controller default setting) Function model 2 - Slow master 和 Function model 254 - Bus controller (总线控制器默认设置) |
1 |
This bit can be used to enable the calculation of all characteristic values calculated on the velocity spectrum.
If this calculation is not enabled, 0 is output for all characteristic values calculated on the velocity spectrum.
To maximize the precision of the characteristic values based on the acceleration spectrum, it is recommended to only enable this bit if the velocity signals are absolutely required.
该位可用于启用在速度谱上计算的所有特征值的计算。
如果不启用该计算，则在速度谱上计算的所有特征值都输出为0。
为了最大限度地提高基于加速度谱的特征值的精度，建议只在绝对需要速度信号的情况下启用该位。