<< 点击显示目录 >> 主页  振动监测 > X20(c)CM4810使用手册 > 寄存器说明 - Register description  > 基本寄存器 - General registers  > 自动增益延迟 - AutogainDelay

 

Name:

AutogainDelay01

名称:

AutogainDelay01

 

This register can be used to configure the autogain delay for all 4 channels.

To ensure that even smaller signals can be calculated precisely, the autogain can be increased in steps. This happens if there has been no overflow in the number of measurement cycles configured in this register and all conditions for the next step were always met. If an overflow does occur, then autogain is reduced immediately by one step.

The unit for delaying autogain is specified in measurement cycles (300 ms).

 

该寄存器可用于配置所有4个通道的自动增益延迟。

为了确保更小的信号也能被精确计算，自动增益（autogain）可以步进。如果在这个寄存器中配置的测量周期数内没有溢出，并且满足步进条件，就会增加增益量级。如果发生了溢出，那么自动增益将立即降低一个量级。

自动增益延迟的单位为测量周期（300 ms）