The frequency response of the sensor is determined by its mechanical construction. The seismic mass and the rigidity of the inner structure is crucial here, as is its construction.
The sensitivity is linear in other areas of the frequency response. The frequency response only increases significantly when near the resonant frequency. Since misinterpretations can occur in proximity to the resonant frequency, the resonant frequency must be correspondingly high.
传感器的频率响应由其机械结构决定。质量块和内部结构的刚度在这里至关重要，其结构也是如此。
灵敏度在频率响应的其他区域是线性的。只有当接近谐振频率时，频率响应才会显著增加。由于在谐振频率附近可能发生误差，因此谐振频率必须相对较高。
Fig.: Frequency response of B&R sensors 0ACS100A.00-1 and 0ACS100A.90-1
图.: B&R传感器0ACS100A.00-1和0ACS100A.90-1的频率响应