<< 点击显示目录 >> 主页 振动监测 > X20(c)CM4810使用手册 > 配件 - Accessories > 传感器 - Sensors > 横轴 - 0ACS100A.90-1 > 技术数据 - Technical data |
Model number 模块型号 |
0ACS100A.90-1 |
---|---|
Sensor properties 传感器属性 |
|
Natural resonance (installed) 共振 (安装后) |
22 kHz (rated) |
Sensitivity 灵敏度 |
100 mV/g ±10% nominal 80 Hz at 22°C |
Frequency response 频率响应 |
2 Hz to 10 kHz ±5% 0.8 Hz to 15 kHz ±3 dB |
Isolation 隔离 |
Isolated base 隔离的底座 |
Measurement range 测量范围 |
±50 g |
Cross-sensitivity 横向灵敏度 |
<5% |
Electrical properties 电气性能 |
|
Electrical disturbances 电干扰 |
Max. 0.1 mg |
Broadband resolution 分辨率带宽 |
0.2 mg (200 µg) over 1 Hz to 15 kHz |
Spectral noise 频谱噪声 |
10 Hz to 10 µg/Hz 100 Hz to 4 µg/Hz 1 kHz to 3 µg/Hz |
Current range 电流范围 |
0.5 to 8 mA |
Bias voltage 偏置电压 |
10 to 12 VDC |
Settling time 整定时间 |
2 s |
Output impedance 输出阻抗 |
Max. 200 Ω |
Housing isolation 外壳隔离 |
>108 Ω at 500 V |
Operating conditions 操作条件 |
|
Degree of protection per EN 60529 符合 EN 60529 的防护等级 |
IP67 |
Ambient conditions 环境条件 |
|
Temperature 温度 |
|
Operation 操作 |
-55 to 140°C |
Max. shock resistance 抗冲击最大值 |
5000 g |
Emitted interferences 发射的干扰 |
EN 61000-6-4:2001 |
Immunity to interference 抗干扰性能 |
EN 61000-6-2:1999 |
Mechanical properties 机械性能 |
|
Housing 壳体 |
|
Material 材料 |
Stainless steel 不锈钢 |
Installation 安装 |
M8 x 1.25 x 33 mm screw, included in delivery M8 x 1.25 x 33 mm 螺栓, 预装在传感器上 |
Weight 重量 |
170 g |
Measurement element 测量元件 |
PZT piezoelectric crystal (lead zirconate titanate) PZT 压电晶体(锆钛酸铅) |
Measurement execution 测量执行 |
Compressed 压缩 |
Tightening torque 拧紧力矩 |
8 Nm |
Connectors 连接 |
M12 |
Table: 0ACS100A.90-1 - Technical data
表: 0ACS100A.90-1 - 技术数据
For applicable certifications for the sensor, see the manufacturer's website.
有关传感器的适用认证,请参见制造商的网站。