Model number 模块型号 |
Short description 概述 |
Figure 图形 |
Other functions 其它功能 |
|
|
X20CM4810 |
X20 analog input module, for vibration measurement and analysis of condition monitoring tasks, 4 IEPE analog inputs, 51.5625 kHz sampling frequency, 24-bit converter resolution
X20模拟量输入模块， 用于振动测量和分析 状态监测任务， 4 个 IEPE 模拟输入， 51.5625 kHz采样频率， 24 位转换器分辨率 |
|
X20cCM4810 |
X20 analog input module, coated, for vibration measurement and analysis of condition monitoring tasks, 4 IEPE analog inputs, 51.5625 kHz sampling frequency, 24-bit converter resolution
X20模拟量输入模块，涂层， 用于振动测量和分析 状态监测任务， 4 个 IEPE 模拟输入， 51.5625 kHz采样频率， 24 位转换器分辨率 |
|
Required accessories 所需配件 |
||
Bus modules 总线模块 |
||
X20BM31 |
X20 bus module for double-width modules, 24 VDC keyed, internal I/O supply continuous
X20总线模块， 用于两个宽度的模块， 直流 24 VDC， 内部 I/O 连续供电 |
|
X20cBM31 |
X20 bus module, coated, for double-width modules, 24 VDC keyed, internal I/O power supply connected through
X20总线模块， 涂层,用于两个宽度的模块，直流 24 VDC ， 内部 I/O 连续供电 |
|
Terminal blocks 接线端子 |
||
X20TB12 |
X20 terminal block, 12-pin, 24 VDC keyed X20接线端子，12引脚，直流24V |
|
Optional accessories 可选配件 |
||
Sensor cable 传感器线缆 |
||
0ACC0020.01-1 |
Cable for accelerometer, length 2 m, 2x 0.34 mm², female M12 connector on the sensor side, can be used in cable drag chains, UL listed
加速度传感器线缆，长度 2m，2x 0.34 mm²，传感器侧 M12 母头，可用于电缆拖链（坦克链），UL 认证 |
|
0ACC0050.01-1 |
Cable for accelerometer, length 5 m, 2x 0.34 mm², female M12 connector on the sensor side, can be used in cable drag chains, UL listed
加速度传感器线缆，长度 5m，2x 0.34 mm²，传感器侧 M12 母头，可用于电缆拖链（坦克链），UL 认证 |
|
0ACC0100.01-1 |
Cable for accelerometer, length 10 m, 2x 0.34 mm², female M12 connector on the sensor side, can be used in cable drag chains, UL listed
加速度传感器线缆，长度 10m，2x 0.34 mm²，传感器侧 M12 母头，可用于电缆拖链（坦克链），UL 认证 |
|
0ACC0150.01-1 |
Cable for accelerometer, length 15 m, 2x 0.34 mm², female M12 connector on the sensor side, can be used in cable drag chains, UL listed
加速度传感器线缆，长度 15m，2x 0.34 mm²，传感器侧 M12 母头，可用于电缆拖链（坦克链），UL 认证 |
|
0ACC0200.01-1 |
Cable for accelerometer, length 20 m, 2x 0.34 mm², female M12 connector on the sensor side, can be used in cable drag chains, UL listed
加速度传感器线缆，长度 20m，2x 0.34 mm²，传感器侧 M12 母头，可用于电缆拖链（坦克链），UL 认证 |
|
0ACC0500.01-1 |
Cable for accelerometer, length 50 m, 2x 0.34 mm², female M12 connector on the sensor side, can be used in cable drag chains, UL listed
加速度传感器线缆，长度 50m，2x 0.34 mm²，传感器侧 M12 母头，可用于电缆拖链（坦克链），UL 认证 |
|
0ACC1000.01-1 |
Cable for accelerometer, length 100 m, 2x 0.34 mm², female M12 connector on the sensor side, can be used in cable drag chains, UL listed
加速度传感器线缆，长度 100m，2x 0.34 mm²，传感器侧 M12 母头，可用于电缆拖链（坦克链），UL 认证 |
|
Sensors 传感器 |
||
0ACS100A.00-1 |
Accelerometer, nominal sensitivity 100 mV/g, top exit
加速度计，标称灵敏度 100mV/g,顶部接口 |
|
0ACS100A.90-1 |
Accelerometer, nominal sensitivity 100 mV/g, side exit
加速度计，标称灵敏度 100mV/g,侧面接口 |
