<< 点击显示目录 >> 主页  振动监测 > X20(c)CM4810使用手册 > 基本信息 - General information

 

This compact module provides a system for measuring and analyzing vibrations for use in applications such as condition monitoring for machinery and equipment.

The measurement unit consists of 4 vibration inputs with 24-bit converter resolution and a sampling frequency of 51.562 kHz. Each of the inputs has a separately activated constant current source to supply IEPE sensors.

Signal conditioning algorithms integrated in the module include configurable high and low-pass filters, an envelope curve generator and a Fourier transform, among many others.

Various parameters and configurable frequency bands are available to ensure seamless signal evaluation. The module performs calculations internally to minimize the load on the bus and CPU.

Whether used for traditional condition monitoring or as a means of process optimization, the maximum evaluable frequency of 10 kHz and maximum frequency resolution of under 63 mHz make it suitable for almost any application. If desired, it can also be used as a standard input module.

The ability to upload all values in the time and frequency domain also allow measurements to be evaluated externally or archived.

 

这个紧凑的模块提供了一个用于测量和分析振动的系统，用于机械和设备的状态监测等应用。

测量单元由 4 个振动输入组成，具有 24 位转换器分辨率和 51.562 kHz 的采样频率。每个输入都有一个单独激活的恒流源，为IEPE传感器供电。

模块中集成的信号调理算法包括可配置的高通和低通滤波器、包络曲线发生器和傅里叶变换等。 提供各种参数和可配置频段，以确保无缝信号评估。

该模块在内部执行计算，以最大程度地减少总线和CPU上的负载。

无论是用于传统的状态监测还是作为过程优化的手段，10kHz的最大可评估频率和低于63mHz的最大频率分辨率使其几乎适用于任何应用。

如果需要，它可以也可用作标准输入模块。上传时域和频域中所有值的能力还允许在外部评估或存档测量结果。

 

 

•4-channel vibration measurement and analysis module

•24-bit resolution at 51.562 kHz

•IEPE supply

•Internal calculation of an extensive range of condition parameters

•Data buffer upload

 

•4通道振动测量和分析模块

•24 位分辨率，51.562 kHz采样率

•IEPE 供电

•大量条件参数的内部计算

•数据buffer区上传