Oscillation sensors can be fitted at any location. The installation position usually results from the measuring task itself. Nevertheless, vibration sensors have a preferred measuring direction. This is normally marked on the sensor housing.
Oscillations perpendicular to the installation position also act upon the sensor. These can be compensated as much as possible through appropriate constructive measures and suitable selection of the piezoelectric crystal.
振动传感器可以安装在任何位置。安装位置通常由测量任务本身决定。然而，振动传感器有一个首选的测量方向。这通常标在传感器外壳上。
垂直于安装位置的振动也会作用于传感器。这些可以通过适当的建设性措施和适当选择压电晶体来尽可能多地补偿。
Installation position
安装位置
B&R vibration sensor 0ACS100A.00-1 is designed for measurements in the longitudinal axis; sensor 0ACS100A.90-1 is designed for measurements in the transverse axis.
B&R振动传感器0ACS100A.00-1设计用于纵轴测量；传感器0ACS100A.90-1设计用于横轴测量。
